12
Setting up the PEAKnx panel as an intercom station
10.
SIP Server IP Address: Enter the IP address of the SIP server. This can be found on the
same page under SIP server address.
11.
Camera Stream: Enter the camera link. This can be found on the same page under Video
decoupling.
12.
Stream Type: Select „MJPEG“.
13.
Unlock Method: Select the mechanism with which your door opener function is linked, e.g.
DTMF. The following methods are available:
−
DTMF: You can find the opening code for DTMF under: Basic settings > DTMF. To activa-
te the door opener in the InHome system via the SG, the only option currently available is
via DTMF (either SIP INFO or RFC2833).
−
Http Request: Enter the http command to open the door.
−
Telegram: Specify the KNX group address of the door. Lock after: If a group address is
specified, a 1 is sent to the group address when the door opener icon is touched and a 0
is sent after the opening interval has elapsed.
14.
Save your entries.
Adding the door station in the visualization
15.
Open the visualization.
16.
In order to ensure that the visualization is automatically activated when the system is reboo-
ted, open the YOUVI Visu settings under Auto start and activate this feature.
17.
Now switch on the Edit Mode and switch to the Dashboard.
18.
Select the “Door Intercom” button to select a door station created in YOUVI Configuration.
19.
When you have added the door station module to the Dashboard, a widget with informa-
tion about registration with the SIP server will appear. If this is successful, the door station
module is ready for use.
