11
Introduction
Introduction
These instructions explain how to set up a Siedle door station with Access-Server with your
PEAKnx touch panel. Communication between the touch panel and the door station takes place
via SIP. Therefore, please ensure that both devices are in the same network and YOUVI has
Internet access.
Use the documentation supplied to set up the Siedle system.
Setting up the PEAKnx panel as an intercom station
On the PEAKnx panel, either the Siedle ASHT 170 software can be installed as an intercom
station or the door station module of the YOUVI visualization can be used.
YOUVI is a KNX visualization software that is included with every PEAKnx panel. For more infor-
mation on setting up YOUVI, please refer to the YOUVI Quickstart at:
www.peaknx.com
Option 1: Intercom with Siedle ASHT software
The corresponding commissioning instructions and the ASHT software can be found under
„Downloads“ in the login screen of the Siedle Access Server configuration.
Note:
After installation, open the ASHT software and use the cogwheel to open the settings.
Select the right tab „Communication“ and scroll down the page to the item „Audio features“.
Set „Echo cancellation“ to „On“.
