PEAKnx PNX11-10010, Начало работы

Страница: 8 / 14

EN Recovery-Stick, Getting started
8
the device switches off.
▪ Connect the Recovery USB Flash-Drive.
▪ Switch on the panel.
Paragon starts from the Recovery USB Flash-Drive. The Main View is displayed.*
▪ Connect a mouse.
▪ Select “Restore backup”.
The Back up Wizard starts.
▪ In Select the archive to restore navigate to the “External devices” tab.
▪ Select in “PARAGON” the pfi file from the created backup folder to restore.
▪ In Select objects to restore , navigate to the “Disk/Partition” tab and select the “Basic GPT
Hard Disk 0” or the “Basic MBR Disk 0”.
▪ In Select the target where to restore to select the “Basic GPT Hard Disk 0” or the “Basic MBR
Disk 0”.
The following message appears: “Partitions are going to be deleted”.
▪ Confirm and continue.
▪ In “Please review the changes” confirm.
▪ In the next window, select “Restore Now” and “Finish”.
▪ Close the window after the restore.
▪ Select the On/Off icon in the upper right corner of the screen and select “Shut Down”.
▪ Remove the Recovery USB Flash-Drive.
▪ Restart the panel.
▪ Attach the front glass.
*Should Paragon not start automatically from the Recovery USB Flash Drive:
▪ Connect a keyboard.
▪ Press the “Delete” key in quick succession during the boot process to enter the boot menu.
▪ In the boot menu, go to the “Startup” tab.
▪ At the bottom of the blue highlighted line you can see the version of the Bios.
For Bios version 2.18.1263:
▪ In the “Boot” tab, check the “Boot Mode Select”. This should be set to “UEFI”. If this is
not the case, select the “Boot Mode Select” with the arrow keys and press
Enter. Select
“UEFI” with the arrow keys. Press Enter again.
▪ Switch to the “Save and Exit” tab.
▪ Select “Save and reboot”.
For Bios version 2.17.1249:
▪ In order to start Paragon directly the next time you use the Recovery USB Flash-Drive,
check the boot order under “Boot Option Priorities”: Boot Option #1 must be “UEFI: SMI
USB DISK” and Boot Option #2 must be the SSD hard disk.
− To change the boot order, use the arrow keys to select Boot Option #1, press Enter,
and use the arrow keys to select “UEFI: SMI USB DISK”.
− Confirm with Enter.