PEAKnx PNX11-10010, Начало работы

Страница: 7 / 14

7
EN Recovery-Stick, Getting started
For what purpose is the Recovery USB Flash-Drive used?
If the Windows user interface shows unrecoverable problems, the operating system can be res-
tored to its default state. Therefore, we recommend creating a backup with the Recovery USB
Flash-Drive after the initial setup. In case of serious errors in Windows it can be started directly
from the Recovery USB Flash-Drive and the operating system can be re-installed.
Creating a Backup on the Recovery USB Flash-Drive
This requires an external mouse and keyboard.
▪ Shut down the panel.
▪ Carefully remove the glass cover by drawing it towards yourself.
▪ Connect the Recovery USB Flash-Drive.
▪ Start the panel with the On/Off-Button.
Paragon starts from the Recovery USB Flash-Drive. The Main View is displayed.*
▪ Connect a mouse.
▪ Select “Create single backup”.
The Back up Wizard starts. The next window shows the backup name and description.
▪ In What do you want to back up , go to the “Disk/Partition” tab.
▪ Select the “Basic GPT Hard Disk 0” or “Basic MBR Disk 0”.
▪ In Choose a target to create your backup on go to “External devices” and select “PARAGON
(D :)”.
A summary is shown.
▪ Click on “Finish”.
The backup file is created.
▪ When the creation is complete, select the On/Off icon in the upper right corner of the screen
and select “Shut Down”.
▪ Remove the Recovery USB Flash-Drive.
▪ Restart the panel.
▪ Attach the front glass.
Restoring the Operating System from the Recovery USB Flash-Drive
This requires an external mouse and keyboard.
Note: All personal data stored on the panel and any additional software installed will be lost
when the operating system is restored.
▪ Shut down the panel.
▪ If this is not possible, carefully remove the glass cover by drawing it towards yourself and
switch off the panel manually. To do this, press the On/Off-Button approx. for 10 seconds until