PCAN-Router Pro FD – User Manual
25
1.
Turn the
ID
rotary switch on the back of the housing to
position F. Use a slotted screwdriver, for example.
Figure 11: Turn the rotary switch on the rear
of the housing to
F
.
2.
Restart the device by interrupting the power supply for the
change of the rotary switch to take effect.
3.
Connect the CAN interface of your computer to a CAN
connector on the PCAN-Router Pro FD.
Note:
The firmware upload is possible with each of the 6 CAN
channels. The selected CAN channel must be connected alone
to the PC.
6.3
Firmware Transfer
Do the following to transfer a new firmware with PEAK-Flash
1.
The software PEAK-Flash is included in the development
package, which can be downloaded via the following link:
www.peak-system.com/quick/DLP-DevPack
2.
Open the zip file and extract it to your local storage medium.
3.
Run the
PEAK-Flash.exe
The program opens.
