PCAN-MicroMod Mix 3 – User Manual
16
Figure 6: PCAN-MicroMod Configuration: selection of the Mix 3 motherboard
Board Type
: PCAN-MicroMod Mix 3
Module No
: 0
The module number of the MicroMod on the Mix 3 motherboard is
set to 0 at delivery and is relevant if you want to configure more
than one MicroMod on the same CAN bus. See also section 3.4
Several MicroMods on the CAN Bus on page 17.
Baudrate MicroMod
: 500 kbit/s
At delivery the MicroMod is set to a bit rate of 500 kbit/s. A change
of this setting will take effect after sending the completed configura-
tion to the MicroMod.
Note:
For the first transfer of a configuration to the module it
must be integrated in a CAN network with a bit rate of
500 kbit/s.
