PCAN-MicroMod Mix 3 – User Manual
14
Pin J3 Port name
Function
Access with
MicroMod service(s)
12 Fout
3
6 Fout
2
High-side switch
by jumper
1.5 A constant
current
5 A short-circuit
current
11 Fout
1
5 Fout
0
Frequency/PWM
outputs
Low-side switch
350 mA constant
current
1 A short-circuit
current
(See Fout 2)
PWM and
Frequency
Output
10 Dout
0
4 Dout
1
High-side switch
by jumper
700 mA constant
current
1 A short-circuit
current
9 Dout
2
3 Dout
3
8 Dout
4
2 Dout
5
7 Dout
6
1 Dout
7
Digital output
High-side switch
350 mA constant
current
500 mA short-
circuit current
(See Dout 0/1)
Digital Output
Important note:
When you use a digital or a frequency/PWM
output as
high-side switch
, the connected load must be linked
to ground (
GND
). Otherwise, the overvoltage protection is not
effective.
3.2
Configuration Program
In order to create and transfer MicroMod configurations the Win-
dows software PCAN-MicroMod Configuration is used. This section
covers basic points about installation and use of the program with
the Mix 3 motherboard.
