PCAN-MicroMod Mix 2 – User Manual
14
Bitrate MicroMod
: 500 kbit/s
At delivery the MicroMod is set to a bit rate of 500 kbit/s. A change
of this setting will take effect after sending the completed configura-
tion to the MicroMod.
Note:
For the first transfer of a configuration to the module it
must be integrated in a CAN network with a bit rate of
500 kbit/s.
3.2.4
Applicable MicroMod Services
The motherboard's inputs and outputs are controlled by the servi-
ces of the MicroMod. The following table shows the assignment of
the motherboard functions to the MicroMod services.
Function on motherboard
Port name
Access with MicroMod service(s)
Digital input
Digital Input
Digital Function
Rotary Encoder
Frequency input (parallel to
channels DIn 0 and DIn 1)
DIn 0, DIn 1
Frequency Input
Digital output (higher-
frequent state changes are
not possible)
DOut 0
Digital Output
Temperature measurment
thermistor (see also table in
section 3.2.5 on page 16)
AIn 3 (NTC)
Analog Input
Curve
Temperature measurement
PT1000
PTx
Analog Input
Curve
Analog input (see also table in
section 3.2.5 on page 16)
AIn 2, AIn 3
Analog Input
Curve
Analog Hysteresis
