Peak PCAN-ISA, Руководство пользователя, Страница: 7 / 25

PCAN-ISA – User Manual
7
2 Hardware Installation
2.1 Configuring the PCAN-ISA Card
Before you install the PCAN-ISA card into the computer you may
need to configure it. For each CAN channel an interrupt (IRQ) and an
I/O address range is set for operation in the computer.
At delivery the PCAN-ISA card has the following default settings:
CAN Channel IRQ I/O Address Range Remark
1 10 300h – 31Fh
2 5 320h – 33Fh Only on the Dual Channel version
Tip: If the given resources are not firmly occupied by other
devices, you can skip the configuration and directly continue
with the following manual section 2.2.
For a configuration differing from the default settings you need to
set jumpers on the PCAN-ISA PCB according to the following
explanations.
Position of the Jumper Fields on the PCAN-ISA Card
The single-channel version of the PCAN-ISA card has two jumper
fields, one for the setting of the I/O address range and one for the
setting of the interrupt (Figure 1). Accordingly the Dual Channel
version has the doubled layout (Figure 2).