PCAN-Dongle – User Manual
5
Software-driven switching from “Multiplex” to “EPP (Enhanced
Parallel Port)” mode
The voltage supply is through the PS/2 keyboard connection
High-Speed CAN connection (ISO 11898-2)
Bit rates from 5 kbit/s up to 1 Mbit/s
Compliant with CAN specifications 2.0A (11-bit ID)
and 2.0B (29-bit ID)
CAN bus connection via D-Sub, 9-pin
(in accordance with CiA® 303-1)
NXP SJA1000 CAN controller, 16 MHz clock frequency
NXP PCA82C251 CAN transceiver
5-Volt supply to the CAN connection can be connected through a
solder jumper, e.g. for external bus converter
Galvanic isolation on the CAN connection up to 500 V
(only opto-decoupled model)
Operating temperature range from 0 to 60 °C (32 to 140 °F)
Note:
This manual describes the use of the PCAN-Dongle with
Windows. You can find device drivers for Linux and the
corresponding information on PEAK-System's website under
1.2
System Requirements
A free parallel port (D-Sub, 25 pins) at the computer, capable of
interrupts
Operating system Windows 10, 8.1, 7 (32-bit) or Linux (32/64-bit)
