PCAN-Dongle – User Manual
20
Do the following to start and initialize PCAN-View:
1.
Open the Windows Start menu and select
PCAN-View
.
The
Connect
dialog box appears.
Figure 11: Selection of the hardware and parameters
2.
Select an interface from the list and continue with step 6.
3.
If no entry is in the list, press the button
Add
. The dialog box
Add CAN hardware
appears.
If the mode of the parallel interface is set to ECP in the
computer's BIOS setup, you can register the PCAN-Dongle
as
PEAK Dongle-CAN SJA EPP
.
4.
Enter the port address and the interrupt of the used parallel
interface established before (see section 4).
