Issue 1.00 DLA200 Dual Line Amplifier Units Page 9
Configure Message
This message is sent to the unit, when the host computer wishes to change which unit or units are to be
on line. When the message has been received by the unit a Status reply message will be sent back by
the unit.
The command will only change the state of the unit IF the unit is in REMOTE mode. The actual
position of the switch is overridden but the indicators on the front panel show the actual status.
CONFIGURE
Instruction 34
Message body: (all bytes/chars)
Description
Values
position of the UNIT SELECT switch
“O" or "A" or "B"
