SPECIFICATIONS
1.
DC Input Voltage
10.5-15V
2.
AC Output Voltage
105-125V
3.
AC Receptacle
Two 110/120V AC North American
Standard Receptacles
4.
Maximum Continuous Power
150W
5.
USB Output DC
Two 5V/500mA
6.
Effi ciency
≥
85%
7.
No Load Current Consumption
≤
500mA
8.
High Input Voltage Limit
15 ± 0.3V (red LED is on)
9.
Short Circuit and Reverse Polarity Protection
1 x 15A spade fuse
10.
Signal Format/Output
Modulated sine wave 60Hz ± 2Hz
11.
Working Temperature
50°F to 86°F (10°C to 30°C)
12.
Storage Temperature
-4°F to 185°F (-20°C to 85°C)
13.
Storage Air Humidity
10%-90%
TROUBLESHOOTING
Problem
Situation
Action
Low output
voltage
Inverter is overloaded
Do not exceed maximum load rating for the Inverter.
Input voltage is below
10.5 volts
Increase input voltage above 10.5 volts to maintain
regulation.
No power
output
12-volt cigarette lighter/
accessory socket needs
ignition to be on
Turn ignition to ACC position.
Battery voltage below
10 volts
Recharge or replace battery.
Equipment being
operated draws too
much power
Reduce load; DO NOT exceed maximum rating for the
Inverter.
Inverter in thermal
shutdown condition
Allow Inverter to cool down. Ensure there is adequate
ventilation around the Inverter. Ensure that load is no more
than its maximum rating for continuous operation.
AC output is shorted
Check condition of power plug and 12-volt cigarette lighter/
accessory socket. Clean or replace as necessary.
Fuse is blown
Check fuse and replace as necessary.
PEAK
CAR BATTERIES