WIRELESS NETWORK
The decco125 offers an optional IEEE 802.11b/g/n wireless network input optimized
for audio. If equipped, this input can be selected by pressing the button on the front
panel or remote control. It can also be selected by starting an audio stream using the
MUZO Player application on a compatible phone or tablet.
To setup the mobile device, please download the MUZO Player application on your
compatible phone or tablet from the App Store (iOS devices) or Google Play (Android
devices).
To setup the decco for wireless streaming, please use one of the following methods:
Setup method 1 - Web Browser
1. Open the Wi-Fi settings on the mobile device and connect to the
decco125_xxxx network
2. Open a web browser and enter 10.10.10.254 in the address bar
3. A settings page will load. Select the desired wireless network and enter the
password (if necessary)
4. Once the decco125 is connected to the wireless network, “forget” or delete
the decco125_xxxx network from the mobile device used to set it up
5. Make sure the mobile device is put on to the same network as the decco125
Setup method 2 - WPS button on router
1. Press and hold the WPS button on the router until it enters pairing mode
2. Press and hold the wireless network input button on the decco125 for more
than 3 seconds
3. The router and the decco125 should find each other and complete the
setup automatically
Once the decco125 is connected to the wireless network, utilize the MUZO Player
application to select and control playback. The MUZO Player application can also
control the decco125 volume and the following input selections: USB, OPT and AUX.
To setup the 1-4 direct access buttons on the decco remote control, navigate to the
station or playlist you want to add and press the small icon in the lower right hand
corner shown as a circle surrounding three dots. This will bring up a sub-menu to
select this as a “Favorite” or a “Preset”. Select “Preset” then select 1, 2, 3 or 4. This will
provide direct access for up to 4 of your favorite stations and/or playlists.
Please visit www.peachtreeaudio.com for any other tips and updates on setting up and
using the wireless input feature.
If the wireless network input stops working; Press the wireless network input button and
the On/Standby button simultaneously to reset the wireless network receiver without
unplugging the unit from AC power.
