FRONT PANEL
USB
OPT
PHONO
AUX
B
C
D
E
F G
H
I
J
B
On/Standby Button: With the AC power cord connected, this button toggles the unit
between On mode (which selects the last input used) and Standby mode which lights
the LED red.
C
USB Button: This button selects the USB input and lights the LED blue.
D
OPT Button: This button selects the OPT input and lights the LED blue.
E
PHONO Button: This button selects the PHONO input and lights the LED blue.
F
AUX Button: This button selects the AUX input and lights the LED blue.
G
Wireless Button: This button selects the optional Wireless network input and lights the
blue LED. This button does not function if the wireless network feature is not enabled.
For more information on the wireless network input, please refer to that section.
Note: The inputs buttons will also toggle the unit into On mode when in Standby mode
for faster access.
H
IR Receiver: Window for receiving Infra-Red (IR) commands from the included remote
control or third-party remote control systems.
I
Volume Knob: Rotate clockwise to increase and counter-clockwise to decrease output
level. Note: the volume level will be indicated for ~2 seconds utilizing the 5 blue input
LEDS on the front panel. Each one represents ~20% of the volume range.
J
Headphone Output: 1/4” headphone output connection. Inserting a headphone
connection automatically mutes the RIGHT & LEFT Speaker outputs. Removing a
headphone connection automatically un-mutes the RIGHT & LEFT Speaker outputs.
Caution: Please lower the output level when inserting or removing headphone
connections as headphone sensitivity varies widely and a comfortable speaker listening
level may be extremely loud when switching to headphones.
Note: The front panel input LEDs are also used to display; volume level, bass level,
treble level and whenever the unit is going into the On or Standby modes. These are
temporary indicators that end after a few seconds.
