Step 6
Attach Tube to Conncect Clip
Insert 7/8” Lower Tube (11)
into the Tube Connector Clip
as shown in the image to the
left.
Step 7
Attach Base Assembly
Insert the both T-bolt heads into the Mounted T-Track Rail
and secure in place by tightening the two knobs as shown
above.
Step 8
Attach C-Connect Clip to C-Connect Clip Base
Using the 1/4x20x1” Bolt (12), washer (9) and lock nut (8),
attach the c-connect clip (4) to the c-connect base (3) as
shown above. Adjust the tightness of the locking nut so
that the c-connect clip pivots smoothly on the base.
Step 9
Attach C-Connect Base to 3/4” upper tube
.
Please note that you can attach this to either side of the
upper tube depending upon your preference. Insert both
1/4”x20x1
¼
” (5) Bolts through the two center holes on
the c-connect base and take the c-connect assembly with
the two bolts and insert into the head on the 3/4” Upper
Tube. Place the black washer (9) on the outer bolt and
secure with the 1/4”x20 ratchet knob (10). Place the Black
Bushing (6), small silver washer (7) onto the center bolt.
Secure with locking nut (8). Adjust the tightness of the
locking nut so that the c-connect base pivots smoothly on
the head of the 3/4” Upper Tube.
Tighten Both Knobs
