Peachtree amp500, Руководство пользователя

Страница: 7 / 10

1 2
3
4 5 6 7
1
FRONT PANEL
B
On/Standby Button: With the AC power cord connected and the rear panel
POWER switch set to ON, this button toggles the unit between On mode which
lights the LED blue and Standby mode which lights the LED red.
Interested in the Green Movement?
• The amp500 meets European RoHS standards for non-hazardous metals
• The amp500 draws less than half a watt of power in standby mode
• The internal power amplifier is set to minimize power consumption when head
phones are used
• We are committed to continue exploring additional methods for making our products
even more environmentally friendly
TROUBLESHOOTING
ISSUE SOLUTIONS
The amp500 will not power on
Check that the power switch on the back panel
is on. If it is, the on/standby LED on the front
panel LED should be lit red. Check that the AC
outlet is functioning correctly by plugging in a
lamp or other device to confirm its operation.
Check that the product controlling the amp500
is turned on if using the 12V trigger input feature
of the amp500.
The amp500 powers on, but there is no sound
Check that the INPUT SELECTION switch
on the rear panel is set to the proper input:
UNBALANCED OR BALANCED. Note: Do
not change the input selection while the unit is
powered on.