PE micro Cyclone for ARM Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 61

background image

Cyclone Automated Control Package

9

2 Software License

2.1 License for Basic and Professional Editions

This software and accompanying documentation are protected by United States
Copyright law and also by International Treaty provisions.  Any use of this
software in violation of copyright law or the terms of this agreement will be
prosecuted.

This software is copyrighted by P&E Microcomputer Systems, Inc. Copyright
notices have been included in the software.

P&E Microcomputer Systems authorizes you to make archival copies of this
software for the sole purpose of back-up and protecting your investment from
loss.  Under no circumstances may you copy this software or documentation for
the purpose of distribution to others. Under no conditions may you remove the
copyright notices from this software or documentation.

This software may be used by one person on up to two different computers,
provided that the software is never used on the two computers at the same time.
P&E expects that group programming projects making use of this software will
purchase a copy of the software and documentation for each user in the group.
Contact P&E for volume discounts and site licensing agreements.

With respect to the physical media provided within, P&E Microcomputer Systems
warrants the same to be free of defects in materials and workmanship for a
period of 30 days from the date of receipt.  If you notify us within the warranty
period, P&E Microcomputer Systems will update the defective media at no cost.

P&E Microcomputer Systems does not assume any liability for the use of this
software beyond the original purchase price of the software.  In no event will P&E
Microcomputer Systems be liable for additional damages, including any lost
profits, lost savings or other incidental or consequential damages arising out of
the use or inability to use these programs, even if P&E Microcomputer Systems
has been advised of the possibility of such damage.

«
...
7
8
9
10
11
...
»

Содержание Cyclone for ARM






























































Отзывы:

Нет отзывов

Похожие инструкции для Cyclone for ARM

Бренд: Gan Systems Страницы: 24

Бренд: Ublox Страницы: 23

Бренд: IBM Страницы: 40

945GC MICRO 775

Бренд: Biostar Страницы: 49

Бренд: MAX power Страницы: 20

Бренд: TYAN Страницы: 63

Бренд: Inrevium Страницы: 57

Бренд: EVGA Страницы: 14

Бренд: Gigabyte Страницы: 96

Бренд: Gigabyte Страницы: 120

Бренд: ECS Страницы: 41

Бренд: Winmate Страницы: 72

Бренд: Toyama Страницы: 48

Бренд: Silica Страницы: 23

Бренд: Nexcom Страницы: 35

Бренд: Nexcom Страницы: 52

Бренд: Lex Computech Страницы: 96

Бренд: Lex Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды