PDP 051-038-NA v.2, Инструкция по эксплуатации

Страница: 4 / 44

How to use the Universal Remote
DEVICE buttons
Switch between devices.
Buttons for operating a PS4
™
system, TV, AV
amplifier, or cable/satellite set-top box
The meaning of the icons shown in the table below is
as follows:
(PS4) used to operate the PS4
™
system
(TV) used to operate the TV
(AMP) used to operate the AV amplifier
(CBL) used to operate a cable/satellite set-top box
PS4 ™ system button Switch the remote to operate the PS4 ™ system
TV button Switch the remote to operate a TV
AMP button Switch the remote to operate an AV amplifier
CBL button Switch the remote to operate a cable/satellite set-top box
Operating a TV, A/V amplifier, or
cable/satellite set-top box
Tips
•
For the latest PS4
™
usage instructions, refer to the
user’s guide for the PS4
™
system
(manuals.playstation.net/document/) .
•
For the latest Universal Remote instructions, refer to
the online user’s guide
(support.pdp.com)
.
•
Only one Universal Remote can be registered with the
PS4
™
system at a time.
•
When you pair the Universal Remote with another
PS4
™
system, registration with the original PS4
™
system is cleared. To use the remote with the original
PS4
™
system, you will have to follow the pairing
procedure again.
7. The red LED on the remote will illuminate for 3 seconds
and then turn off, indicating successful pairing.
8. If pairing is unsuccessful, repeat steps 3 through 6.
Note: The remote will enter sleep mode after 30 minutes
of inactivity. To wake the remote, press the PS button or
PS4 device button. Sleep mode does not affect TV, CBL,
or AMP operation.
You can use the Universal Remote to operate a TV, A/V
amplifier, or set-top box. Set the remote code to match
the product in use.
Device Buttons