Instruction Manuals
Bluetooth Control
Button input Frequency
Function
8
WWW.PDMOVIE.CO.UK
REMOTE AIR 4 User Manual
Motor Function Table
Switch signal channel/Terminate calibration
R1 G2 B3 --Switch control channel
Y4 C5 P6--Switch the standby channel (Reserve Function)
Restart the lens cycle when powered off / Remove the lens setting.
FAST/MEDIUM/SLOW--Switch Motor Rotation Speed 2
Calibrate Lens
Switch Motor Rotation Direction
Turn on the Bluetooth
①
Cancel the calibration cycle:
There’s no need to
restart the motor, just press the button four times to
reset the cycle manually; Restart the lens cycle when
powered off: When the motor is suddenly powered off,
just press the button four times to restart the calibration.
②
Light Blinking Quickly:
High response speed
Light Blinking Slowly: Medium response speed
Light Constant: Slow response speed
1.Turn on the Bluetooth controller and motor
Press and hold the OFF/ON button on the Bluetooth controller for three seconds, until the screen illuminates. The
PD-RX (Receive motor) will turn on automatically when connected to the power.
Hold the button down
for 3 seconds.
2.Bluetooth Connect
After the Bluetooth controller is turned on, the indicator lights will flash quickly for 60 seconds, which means the
Bluetooth is being searched. When the Bluetooth connection is successful, the controller indicator light is bright,
and the Bluetooth logo on the motor display is on.
1.Searching Bluetooth
：
Blinking fast 60s.
2.Successful Connection:
Constant
