PDI-TR100 Table Radio
User Manual
Document PD196-191R3
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
P a g e
|
9
Wireless Pairing to a Television
To pair the radio with the TV, you must have a PDi program remote and a PDi television that offers wireless
capability. Using the remote, confirm the proper TV settings are enabled using steps below. Once pairing is
complete, control of the TV and TV sound will be available through the table radio.
1.
Press SETUP on the program remote and press
▼to highlight
System
menu
2.
Press ►to enter.
3.
In the System menu,
press ▼ to highlight
Standby Power
.
4.
Press ►to set Standby Power to
Normal
.
5.
Press SETUP or OK to go back to the SETUP menu and
press ▲to highlight
Features
menu.
6.
In the Features menu, press ▼to highlight
Wireless.
7.
Press ►to select
Wireless PDi.
Press SETUP until you are out of the setup screen.
8.
On the program remote, press the
Blue
button to
bring up the Wireless Pairing Data Interface
menu.
9.
Press ►to set the wireless status to
Wireless PDi
.
Now set the
Radio to TV mode.
Press and hold down the Pair button on the back of the
radio for 5 seconds until the
word
PAIR
appears on the
radio’s display.
The radio will remain in Pairing Mode for 180 seconds. If
necessary re-enable Pairing Mode by depressing the Pair
button for 5 seconds.
