PDI-TR100 Table Radio
User Manual
Document PD196-191R3
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
P a g e
|
2
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER OR BACK. THERE
ARE NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
FCC INFORMATION
This equipment has been tested and found to comply with the
FCC CFR Title 47 Part 15 Subpart C rules. These limits are
designed to provide reasonable protection against harmful
interference. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
Consult the dealer or an experienced radio technician for help.
MODIFICATIONS
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
SERVICING
If your product is not operating correctly or exhibits
a marked change in performance and you are
unable to restore normal operation by following the
detailed procedure in its operating instructions, do
not attempt to service it yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE
Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
•
When the power supply cord or plug is damaged.
•
If liquid has been spilled, or objects have fallen into
the product.
•
If the product has been exposed to rain or water.
•
If the product does not operate normally by following
the operating instructions.
•
If the product has been dropped or damaged in any
way.
•
When the product exhibits a distinct change in
performance which indicates a need for service.
REPLACEMENT PARTS
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
SAFETY CHECK
Upon completion of any service or repairs to this product, ask
the service technician to perform safety checks to determine that
the product is in safe operating conditions.
CLEANING & DISINFECTING
Unplug the radio before cleaning.
Use a soft damp cloth to clean.
Do not use harsh chemicals such as solvents
.
DISCLAIMER
The author and publisher have used their best efforts in
preparing these instructions. PDi Communication Systems, Inc.
make no representation or warranties with respect to the
accuracy or completeness of the contents of this guide and
specifically disclaim any implied warranties or merchantability
or fitness for any particular purpose and shall in no event be
liable for any loss of profit or any other damages. The
information contained herein is believed accurate, but is not
warranted and is subject to change without notice or obligation.
COPYRIGHT
PDi Communication Systems, Inc. claims proprietary right to
the material disclosed in these instructions and issues them for
user information only and may not be used to manufacture
anything shown herein.
