PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Document Number: PD196-293R1
PD251-031 Android Based Module
Page 26 of 35
Slide to the ftp server tab.
You will see your network status and an icon labeled
Start
Service
.
Select
Start Service
to start the ftp server on this device. If
you see the icon label
No wi-fi-Network
please check your
network connection.
Note: The ftp server will work only on a Wi-Fi connection
Note: The ftp server will have to be manually re-started when
the device reboots.
Touch the back icon
to go back to the cloning application screen.
**If you would like to use the auto cloning feature, touch the
Confirm and save slave config file
button.
The
Confirm and save slave config file
takes you to the
Slave configuration setup.
Make sure the entries are in Green. This means the host is
reachable and the file is available.
Select
Done
to save the slave config file that will be picked
up by the auto-cloner.
You may also use this information for manual slave set-up.
Congratulations, your master clone setup is complete! Touch
All Done
to exit the cloning application
