Communication
Systems Inc.
PDI-P26LCDD Quick Start Guide
Page 7 of 7
Better Solutions Are Within Reach™
INSTALLATION INSTRUCTIONS
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 PH +1-937-743-5664
Document Number: PD196I127R1.DOC
8. A confirmation menu will appear before proceeding. Press either the
▲
direction to start auto programming. Press
▼
direction button to cancel the operation. The TV will now search all available channels. Press the SETUP button to
return to normal TV viewing.
SOUND PROGRAMMING
Most hospital installations utilize a remotely wired pillow speaker. The following instructions customize the sound to the
attached pillow speaker.
Internal Speaker Enable
The speaker’s inside the TV’s cabinet are normally silenced and sound is routed externally to the attached pillow speaker.
1.
In the Sound menu, press
▲
/
▼
direction button to select the Internal Speaker Enable menu item.
2.
Press the
▲
/
▼
direction button to select the desired Service Level(s) or Sources.
3.
Press
◄
/
►
direction to select Disabled and turn off the TV’s internal speakers.
4.
Press the SETUP button to return to the preceding menu.
Minimum Volume
For pillow speakers with an adjustment thumbwheel volume control, always set a minimum volume level for the TV.
Set this level to any value other than 0 guarantees that some level of sound will always be heard when the TV is
operating. A minimum volume setting is usually not required for pillow speaker’s with dedicated Volume up and down
buttons.
1.
In the Sound
menu, press the
▲
/
▼
direction button to select Minimum
Volume
.
2.
Press the
◄
/
►
direction button to select your preferred minimum volume with the TV turns on.
3.
Press the SETUP
button to return to the preceding menu.
Power On Volume
Sets the initial volume the TV starts at upon powering on. Once the TV is on, the volume can be set to any allowable
level.
1.
In Sound
menu, press the
▲
/
▼
direction button to select Power on Volume.
2.
Press the
◄
/
►
direction button to determine your preferred volume when the TV turns on. Setting the level to LAST
causes the TV to remember the last volume level used by the TV prior to turning off.
3.
Press the SETUP button to return to the preceding menu.
Additional Information
Additional information is available in the user manual. Please request document number PD196-126.
All manuals and user guides at all-guides.com
