19
REPLACING THE FUSES
WARNING
: To avoid electric shock, disconnect the test
leads from any source of voltage before removing the
fuse/battery cover.
1. Disconnect the test leads from the meter and any item
under test.
2. Remove the fuse/battery cover by loosening the two
screws using a Phillips head screwdriver.
3. Remove the old fuse from its holder by gently pulling it
out.
3. Install the new fuse into the holder.
4. Always use a fuse of the proper size and value
(0.8A/250V fast blow for the 600mA range, 10A/250V
fast blow for the 10A range).
5. Replace the battery cover and secure with two screws.
WARNING
: To avoid electric shock, do not operate your
meter until the fuse door is in place and fastened securely.
Warranty
This PDI product is warrantied to be free from defects in
materials and workmanship for a period of two (2) years
from the verified date of purchase. During this warranty
period, PDI will either repair or replace the defective unit, at
PDI’s discretion. A purchase receipt or other acceptable
form of proof of original purchase date will be required
before any warranty processes begin. PDI warrants all
authorized repairs with a six (6) month limited warranty.
