15
under test so the rest of the circuit will not interfere with
the resistance reading.
4. Read the resistance value on the display. The display will
indicate the proper decimal point, value and symbol.
CAPACITANCE MEASUREMENTS
WARNING:
To avoid electric shock, disconnect power to
the unit under test and discharge all capacitors before
taking any capacitance measurements.
1. Set the function dial to the position, and press
MODE
button to select the capacitance mode.
2. Insert the black test lead into the negative (
COM)
jack and
the red test lead into the positive (
jack.
3. Touch the test probe tips to either side of the circuit or part
under test. It is best to disconnect one side of the part
under test so the rest of the circuit will not interfere with
the resistance reading.
4. Read the capacitance value in the display. The display
will indicate the proper decimal point, value and symbol.
NOTE
: In order to obtain an accurate reading, a capacitor
must be discharged before measurement begins.
CONTINUITY CHECK
WARNING:
To avoid electric shock, never measure
continuity on circuits or wires that have voltage on them.
1.
Set the function dial to the position
，
and
press the
MODE
button until the symbol appears on
the top of the display.
2. Insert the black lead into the negative (
COM)
jack and
