background image

 
 
 

PAGE 4 

 

Class 1 Medical 

Rev. 0 

 

1

 

SPECIAL NOTES

 

WARNING/CAUTION 

-

 

Notices as used in this manual apply to hazards or unsafe practices, which 

could result in personal injury or property damage. 
All wheelchair set-up and adjustments must be performed by a qualified technician. 

NOTE

 – THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT 

NOTICE.  An updated version of this owner’s manual may be available at www.PDGMobility.com 

INDICATIONS FOR USE

 – The Stellar LEAP Manual Tilt Wheelchair is intended to provide mobility to 

persons restricted to a seated position. 

CONTRAINDICATIONS: 

 

Does not have the required ability to adequately manage the functions of a manual tilt-in-
space wheelchair and does not have a capable caregiver for the required assistance 

 

Cannot tolerate prolonged periods in a seated position 

 

Cannot tolerate prolonged periods in a seated position with posterior tilt 

 

Cannot tolerate prolonged periods in a seated position with a reclined back position

1

 

 

Is susceptible to significant skin shear due to the relative movement of a reclining backrest

1

 

 

Cannot tolerate an anterior seated position

1

 

 

Highly agitated occupants 

1

For dynamic recline backrest and anterior tilt options only

 

WHEELCHAIR USER

 - As a manufacturer of wheelchairs, PDG endeavors to supply a wide variety of 

wheelchairs to meet the many needs of the end user.  However, final selection of the type of 

wheelchair to be used by an individual rests solely with the user and his/her health care professional 

capable of making such a selection. 

WHEELCHAIR TIE-DOWN RESTRAINTS AND SEAT RESTRAINTS

 – Wheelchair users are NOT to be 

transported in vehicles of any kind while in wheelchairs.  If transportation in a vehicle in the 

wheelchair is required, the wheelchair must be equipped with PDG factory installed Transport-Ready 

Tie-down mounting points.  The wheelchair must be restrained from movement using a government 

approved wheelchair tie-down system and the vehicle must be equipped with government approved 

anchor points.   
Users of wheelchairs should be transferred into appropriate seating in vehicles for transportation and 

use should be made of the restraints made available by the auto industry.  PDG cannot and does not 

recommend wheelchair transportation systems.  

RESTRAINT DEVICES and SEAT BELTS - IT IS THE OBLIGATION OF THE HOME DEALER, THERAPISTS 

AND OTHER HEALTH CARE PROFESSIONALS TO DETERMINE IF A SEATING RESTRAINT IS REQUIRED 

TO ENSURE THE SAFE OPERATION OF THIS EQUIPMENT BY THE USER. SERIOUS INJURY CAN OCCUR 

IN THE EVENT OF A FALL FROM A WHEELCHAIR. 

 

 

Содержание STELLAR LEAP







































Отзывы: