PD Technology BigBot Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 61

PD Technology BigBot Скачать руководство пользователя страница 3

INDEX

PAGE 1: TITLE
PAGE 2: PREFACE
PAGE 3: INDEX
PAGE 4: INDEX (CONTINUED)

PAGE 5: 1.1 ASSEMBLE BED ADJUSTING THUMB NUT: 4 TIMES
PAGE 6: 1.2 ASSEMBLE HEIGHT LOCKING THUMB NUT: 4 TIMES
PAGE 7: 1.3 ASSEMBLE 90 CORNERS TO Y BEARING MOUNTS: 4 TIMES
PAGE 8: 1.4 ASSEMBLE SCREWS, WASHERS, AND TSLOT NUTS TO BED
PAGE 9: 1.5 ASSEMBLE HEATERS TO BUILD PLATFORM 1.6 SLIDE FRAME INTO BUILD

PLATFORM

PAGE 10: 1.7 ASM Y BEARING MOUNT TO FRAME
PAGE 11: 1.8 ASM SIDE FRAME INTO BUILD PLATFORM
PAGE 12: 1.9 ASSEMBLE FRAME CROSS-MEMBERS: 600x600 ONLY
PAGE 13: 1.10 MOUNT THERMISTOR TO BUILD PLATFORM
PAGE 14: 1.11 ASM Y BELT, CORNER PROTECTORS, AND Y CHAIN MOUNT

PAGE 15: 2.1 ASM Y ROD MOUNT HARDWARE: 4 TIMES
PAGE 16: 2.2 BUILD Y BELT IDLER/TENSIONER
PAGE 17: 2.3 ASSEMBLE FRONT AND REAR FRAME MEMBERS
PAGE 18: 2.4 ASM LOWER Z BEARING ROD MOUNT: 2 TIMES
PAGE 19: 2.5 ASM SIDE FRAME MEMBERS
PAGE 20: 2.6a (600x600 ONLY): ASM Y MOTOR MOUNT TO FRAME
PAGE 21: 2.6b (600x300 AND 300x300): ASM Y MOTOR MOUNT TO FRAME
PAGE 22: 2.7a (600x600 ONLY) ASM Y MOTOR FRAME TO MAIN FRAME
PAGE 23: 2.8 ASSEMBLE BED TO MAIN FRAME
PAGE 24: 2.9 TIGHTEN Y BELT AND Y ROD MOUNTS. ALIGN BED ASM

PAGE 25: 3.1 ASM FRAME SUPPORTS
PAGE 26: 3.2 ASM Z MOTOR MOUNTS: LEFT AND RIGHT
PAGE 27: 3.3 ASM GANTRY CORNERS
PAGE 28: 3.4 ASM GANTRY SIDE FRAME TO TOP OF GANTRY
PAGE 29: 3.5 ASSEMBLE X IDLER MOUNT (LOOSE BEARING MOUNT SCREW)
PAGE 30: 3.6 ASSEMBLE X MOTOR MOUNT (LOOSE BEARING MOUNT SCREW)
PAGE 31: 3.7 FLIP BED ASM UP AND INSERT Z BEARING RODS
PAGE 32: 3.8 ASSEMBLE GANTRY TO LOWER ASSEMBLY
PAGE 33: 3.9 REEL HOLDER AND FILAMENT GUIDE

«
1
2
3
4
5
...
»

Содержание BigBot






























































Отзывы:

Нет отзывов