INSTALLATION INSTRUCTIONS:
1.
Determine the installation location of the antenna on the windshield or the rear window. Make sure that
the mounting glass surface is clean and free of debris and any imbedded obstructions such as antenna
wires, defroster wires, heavy tinting, etc.
Notes:
• The recommended location is behind the rearview mirror, above the mounting foot on the windshield.
•
Do not mount the antenna to the dashboard or the rear deck as the antenna may obstruct the view of
the vehicle driver.
• For optimum performance, mount the antenna to the inside surface of the vehicle’s glass.
2.
Test fit the antenna on the selected area prior to removing the release liner from the tape on the
antenna’s mounting surface.
3.
Remove the release liner and carefully position the antenna above the selected mounting area.
4.
Place the antenna on the mounting surface and apply even pressure to allow the foam tape to conform
to the windshield curvature. 50% of the bond strength is achieved after 20 minutes. Avoid contact with
the antenna for a minimum of 20 minutes after initial installation. Full bond strength of the adhesive tape
is realized after 72 hours.
C a u t i o n
The adhesive tape is very strong and will bond instantly on the mounting surface. Once the antenna is
placed on the surface, it cannot be moved.
