USB 2.0 Timely Alarm Status Temperature Recorder
Model: MTC8cn0.5_6Day
User Manual
Operation Instructions:
Start Record: Hold down button about 6 seconds until the green indicator flashes quickly, that means
data logger has started.
(After starting the device, flash once in 3 seconds, the device starts recording temperature data after
a delay time)
Recording Logger: Indicator flashes once per 3 seconds that means in a normal logging status.
Data Read: Plug PDF12H1 into the PC USB port, there will be a U disk drive letter appeared in the
bottom right corner of the computer, open the letter, open the PDF document, you can read, analysis
and save the report ;
(If the product is from the low temperature to room temperature, please wait for 5 minutes, then take
the product out from waterproof bag, then plug it into PC)
End of Record: Data logger will stop automatically after read data.
Red indicator will be long on bright when press start button that means the data logger has been used,
the logging recorded data will be saved forever.
Different Temperature Status Indicators:
No
Status
LED
1
Upper alarm
Red light flash
2
Normal temperature
Green light flash
3
Lower alarm
Blue light flash
