PCO.IMAGING pco.1200 hs Скачать руководство пользователя страница 13

Chapter 3 

‚

 Camera Functions 

page 13 

and reconnect it later. Further, the image memory in the 

camera enables (see Figure 3.1, pco.camera – camRAM) 

extended operating modes (e.g. ring buffer operation). In 
this mode, images are continuously recorded and, as the 

memory is filled, the oldest image data are overwritten. 

Once the event finishes, it is possible to stop the re-
cording process and the event will reside in the memory, 

as well as a certain amount of time before the event. 

Once recording is finished, the user can stop the re-
cording process and keep it in memory as well as a cer-

tain time before the event. In the following sections, single 

components image memory, Live-View, CCD readout, 
CCD cooling and color display are described in more de-

tail. 

3.2 

Primary Image Memory (camRAM) 

The primary image memory (camRAM) of the camera sys-

tem is integrated into the camera. 

3.2.1  Primary Image Memory Structure 

The image memory is divided into four memory segments 
that accept images (see Figure 3.2). The user determines 

the size of the segments.  

 

Information about the delivered camera’s image memory 
size is found in the camera specific data sheet in the ap-
pendix of this manual. 

 

Camware application software uses one of the segments 
for Live-View and other display purposes. If camware is 
used, only three segments are available for customer 
specification. 

camRAM

memory segment 1

memory segment 2

memory segment 3

memory segment 4

 

Figure 3.2: 

Illustration of the camera’s primary image memory (camRAM. 
The image memory is divided into four memory segments 
(memory segment 1-4), which accepts the images for storage. 

The size allocation of each segment is completely user-

selectable (see Figure 3.3). It is also possible to set the 

size of a segment to zero. The format of the images to be 
stored, might differ from segment to segment. Within the 

same segment the image format is fixed, meaning that to-

tal images, binned images or ROIs  have  to  be  stored  in 
different segments. 

User Manual pco.camera status 12/2004 

Содержание pco.1200 hs













































Отзывы: