PCM PCMSP1376HS, Руководство пользователя

Страница: 4 / 10

Pg. 4
about 2-3 hours.
• Connect the USB charging cable to a computer USB port and the Micro
USB plug to the charging port of the device. The Red LED light turns on
while the device is charging. It takes 2-3 hours for the unit to fully charge.
When the battery is fully charged, the red light will turn to blue.
Turning on/off the device
• Press and hold the MF button for 2-4 seconds to turn ON or OFF the
device with the sound “POWER ON” or “POWER OFF”.
Pairing the device with BT devices (phone or music device)
• Once you have activated BT on your device, select the “BL-1376HS” from
the list of available BT devices.
• Please note pairing mode on the device will last for around 10 minutes.
If no devices are paired within around 10 minutes the device will power off
automatically.
• If pairing is unsuccessful, turn off the device first and then re-pair following
the above steps.
• Once you have paired the BT Headphone with a device, the Headphone
will remember this device and will pair automatically when the device’s BT is
activated and in range. You do not need to re-pair any previously connected
devices.
• The BT Headphone will attempt to automatically connect to the last device
it was paired with when switched on. If you want to pair it with a new device,
please follow the steps outlined above.
• Once the BT Headphone is paired with your device the music will transmit
through the BT Headphone. Please refer to your device’s user manual for
further information.