WIRELESS HEADSET REFERENCE
Dock the headset onto the charging stand base when not in use in order to keep
headset charged. Headset power should last about 12 hours on a full charge.
**IMPORTANT**
For successful charging and pairing, the headset must be placed
on the charging stand base using the
**Space between the Ear Cup and Headband.**
The
Battery Status
Light will be lit when headset is connected properly for charging;
however,
Battery Status
Light does NOT indicate whether or not headset is paired with
charging stand base. Headset will not work if it is not paired to charging stand base
(see back of this sheet for more info on how to make sure headset is successfully paired with base)
.
NOTE:
Both the USB cable and the power
adapter must be plugged into the charging
stand base in order for the headset to work
wirelessly
when you remove it from the charging
stand base to record a periodontal chart. Once
the headset is removed from the charging stand
base, the
Battery Status
Light will not be lit, but
the
Headset Pairing Status
Light will function
and will tell show you the pairing status of the
headset: (1) paired, (2) trying to pair or (3) not paired.
4
Connect the charging stand base to the
computer where the VoiceWorks software
is installed using the supplied USB cable.
Headset Pairing Status
Light
(see back of this sheet for more info)
Battery Status
Light
(lit when headset is properly seated
in charging stand base for charging)
Ear Cup
Headband
Volume Up
Mute button
(Say,“
VoiceWorksOFF
” instead)
Volume Down
Mute LED
(lit when microphone is muted)
**Space between the Ear Cup
and Headband
**
(make sure headset is properly
placed in charging stand base for
successful charging and pairing
using this space)
Connect the charging stand base to the
power adapter and the power adapter
to an electrical outlet.
Insert the FP32 Software Key into a USB
port on the same computer.
3
Quick
Start
1
2
1-877-357-7623 FloridaProbe.com
Microphone
(make sure it is positioned by mouth)
Char
ging
S
tand base
