PCL ACCURA
QUBE Tyre Inflator
www.pclairtechnology.com
General Specifications
Max inlet supply:
218 psi / 15 bar / 1500 kPa
Recommended supply:
10 psi / 0.7 bar / 70 kPa
above the max set pressure of Inflator
Max operating pressure: 145 psi / 10 bar / 1000 kPa
Min operating pressure: 4 psi / 0.3 bar / 30 kPa
Display resolution:
1 psi / 0.1 bar / 10 kPa
Units of measurement:
psi / bar / kPa / kg/cm
This Equipment also complies with the EC directives:
89/336/EEC (EMC directive)
confirmed by report No.10462/TR/1
73/23/EEC (LOW Voltage Directive)
as amended by 93/68/EEC
Accordance with IEC/EN 61010-1:2001 confirmed by
report No. TTR-004115-18-00
Installation
The inflator is designed for inside use only.
The compressor
producing the air should have the necessary
water and dirt filtration, to minimise accumulation of debris at the
inflator line filter strainer.
The wall-installed device
has to be tightened to the wall by
means of 4 screws
The unit is designed to run with the earth connection installed.
"According to Class 1 - Basic insulation in conjunction with
protective Earthing"
Calibration & Accuracy
The accuracy of our digital units when released from our factory is
that:-
The maximum permissible error (MPE) = 0.08 bar
Each unit, before release, is checked and calibrated on test
equipment that has accuracy traceable to a UKAS Laboratory No.
0221 referenced to certificate 0029346.
Control Panel
Key Legend
Increase or decrease to set pressure in all modes
Allow flat tyre in Standard (std) and Tyre Shop (tir) modes
Tyre top off in N2 (N2P) mode
Switch pressure unit in Standard (std) mode
Toggle OPS in Tire Shop (tir) mode
Starts tyre purging in N2 (N2P) mode
All QUBE models have a filter housing
either G1/4 or US Market 1/4 NPT inlet
and outlet ports.
It is recommended that when tightening
any hose connections to the QUBE the
user selects two spanners. Hold the filter
housing with one spanner, to ensure it
does not spin, then tighten the hose
connection with the other
4 user touch type buttons
Buzzer
Air/N
2
supply port
Tyre out port
Deflate exhaust
G1/4
G1/4
US Market 1/4 NPT
US Market 1/4 NPT
