48
Appendix
A. Troubleshooting
Status LED
The following table lists the LED patterns in general.
Condition LED
color
Loading system after power on
Steady red
During booting procedure
Steady green, blue and red
Detecting and setting network
Steady green and blue. Blink red till IP
address is confirmed
After network is setup (system up)
Blink green every second and steady red
During the upgrade firmware process
Blink green every second and fast blink red
Enable audio
Steady blue. Disable audio will turn off blue
LED.
Reset and restore
There is a button in the back side of the Network
Camera. It is used to reset the system or restore the
factory default settings.
RESET: Click on the button.
RESTORE:
1. Press on the button continuously.
2. Wait for all LED blink fast.
3. Free the button.
Restoring the factory defaults will erase any previous settings.
Содержание CS-WMVO2G
Страница 1: ......
Страница 51: ...DA090421 CS WMV02G_HK_US_PDF A_V2...