PCE Instruments PCE-VM 40A, Руководство пользователя

Страница: 36 / 37

Manual
36
5.26 Mounting
The cast aluminium case of the PCE-VM 40 is suitable for direct mounting because of its weight.
However, we recommend using the tripod floor plate VM40-BP, available from PCE Instruments as an
optional accessory. The VM40-BP has adjustable feet for aligning the axes, including exchangeable tips
for different floor types.
At higher magnitudes, the PCE-VM 40 should be attached by screws. According to SN 640312a, free
placement is not allowed at accelerations above 3 m/s². The corresponding velocity is, for example, 24
mm/s at 20 Hz or 12 mm/s at 40 Hz. For screw attachment, the PCE-VM 40 has four through holes for
screws up to M5 with a maximum head diameter of 8 mm. It is not necessary to open the case in order to
mount the device. You only need to remove the two plastic shades.