© PCE Instruments
7.3
Language
Open the main menu and navigate to the submenu “LANGUAGE”. Use and to navigate,
choose your language and confirm your choice.
7.4
Date and time
System time
Open the main menu and navigate to the submenu “DATE / TIME“. Use the and buttons
to switch between the setting fields and and to set the values correctly. Confirm your
choice by pressing
.
Time format
To set the correct time format enter the main menu first and then enter the submenu “DATE /
TIME”. You can go to the time format setting by using and . and help you to choose
the correct time format (YY/MM/DD, MM/DD/, DD/MM/YY). Confirm by pressing
.
Time and date stamp
The borescope gives you the opportunity to mark your files with a time and date stamp. To
activate this function, enter the main menu and then enter the submenu “DATE / TIME”. By
using and you can get to the function “TIMESTAMP”. Choose “YES” or “NO” and confirm
with
.
7.5
Automatic shutdown
In order to reduce the battery consumption, the borescope has an automatic shutdown function
that can be activated. To do so, enter the main menu and the submenu “AUTO POWER OFF”.
The buttons and can be used to navigate through the different time settings. You can
choose between 5, 10, 20 and 30 minutes or deactivate this function by selecting “OFF”.
Confirm your choice by pressing
. If the device has turned itself off, it does not enter a sleep
mode but switches off completely and must be restarted completely.
8
Connectors
8.1
USB
The USB interface is commonly used to connect the borescope to a computer. It supports two
different modes. On the one hand it supports the data transmission and on the other hand it can
help to display the live pictures on a computer. When the borescope is connected to a
computer, it displays “READER” and “CAMERA”. Depending on what mode needs to be set you
can use the and buttons to make your choice. Confirm with
.
You can also get there by entering the main menu and choosing the submenu “USB“. If the
device is connected via USB, a USB icon will appear in the left information box. If the reader
function is chosen there will be a stylized SD card symbol on the display. The reader mode can
be stopped by pressing
.
