© PCE Instruments
47
Eng
li
s
h
6.11
Evaluate series of measurements
The software of the data logger offers various types of views to visualize the sensor data of the
series of measurements.
When at least one series of measurements has been loaded and selected, you can click on one
of these icons:
. to select one or several sensors.
After selecting the sensors, you can select the view. The corresponding icons can be found in the
group „Views“.
As soon as at least one sensor has been selected, you can open a certain view in a new window
by
clicking
on
one
of
these
sensors:
.
All windows that belong to a series of measurements are listed in the left-hand part of the main
window, below the corresponding series of measurements.
Example: four views that belong to one series of measurements
In the "settings dialog" which can be opened with the icon
from the group "Settings", you
have two options regarding the view:
- "Only show windows of the current series of measurements" ("Single" in the status bar)
or
- "Show all windows of all series of measurements" ("Multiple" in the status bar)
If you choose to only show the windows of the current series of measurements, all views will be
hidden when a different series of measurements is selected, except for that of the current series
of measurements,.
This (standard) setting makes sense if you wish to have several series of measurements opened
in the software but only want to view one of them.
The other option is to show all views of all opened series of measurements.
This setting makes sense if you only have very few series of measurements opened at the same
time and want to compare them.
