© PCE Instruments
46
Eng
li
s
h
6.10
Delete series of measurements
A series of measurements saved to the software memory can be removed from the memory in
two different ways:
- Select a series of measurements from the list and press the
„Del“ key on your keyboard
or
- Select a series of measurements from the list and click on the icon
in the group "Series of
Measurements".
A series of measurements deleted this way can be re-loaded from the quick memory at any time.
However, if you want to delete a series of measurements irrevocably, you must click on the icon
in the group "Series of Measurements".
A window
with an overview of all measurement series from the PC’s quick access or which are
only saved on the SD card of a connected data logger is shown first (similar to loading series of
measurements).
Now you can select one or more series of measurements you wish to delete.
A confirmation prompt will then appear, asking you to confirm if you really wish to delete these
series of measurements.
Depending on the location of the measurement series to be deleted, they are either deleted from
the PC’s quick access only or from the SD card of the data logger.
Note
: Please bear in mind that this type of deletion is permanent!
