© PCE Instruments
21
Eng
li
s
h
5.4
Software
5.4.1
Installation
Device driver
1.
Connect the device to your PC by using the supplied USB cable. A notification
appears which asks you to install the “CP2102 USB to UART Bridge Controller”.
2.
Put the software CD into the CD-ROM drive of your PC.
3.
Click on the computer symbol on your desktop and access the CD-ROM drive by
clicking on it with the right mouse button and selecting “Open”.
4.
Open the “USB Driver” folder.
5.
Start the “CP210xVCPInstaller_x64.exe” file if you run a 64 bit operating system or
start the “CP210xVCPInstaller_x86.exe” file if you run a 32 bit operating system.
(If you are not sure which operating system is installed, right-click the computer icon
on your desktop and select “Properties”. Now check “System type” to find out which
operating system you use.)
Software
1.
Put the software CD into the CD-ROM drive of your PC.
2.
Wait for the Windows auto
play window to appear and click on “Run setup.exe” or
double-click on the CD-ROM drive.
3.
Follow the instructions on the screen.
5.4.2
Operation
Turn on the device, connect it to your PC and start the software. Now you see the main screen:
