Manual
7
5
Instructions
1. Open the battery compartment cover and insert a 9 V block battery.
2. Switch on the anemometer by pressing and holding the
key for a second. Release the key as
soon as you can see some digits in the LC display.
3. Switch off the device by pressing and holding the
key for three seconds. You can release the key
when the display is switched off.
4. After switching on the device, press the
key to switch the backlight on or off. The backlight will
switch off automatically after 30 minutes of inactivity.
5. After selecting the mode of measurement, press the
key to choose the desired unit for
determination of the wind velocity.
6. Press the
key once to hold values. The HOLD icon will appear in the LC display, indicating that the
values have been held. To exit HOLD mode, press this key again.
7. To read out maximum values, press the
key once until the MAX icon appears in the display. To
read out minimum values, press this key again. The MIN icon will appear in the LC display. To disable
this function, press the same key again.
8. Press the
key once. The AVG icon will appear in the display. The device will then display the
average measurement values of the last 30 seconds.
9. Press the
key to select between °C and °F.
