26
ii. Under Scope mode
The specification is same as
Hi. Under Multimeter mode
, press
RANGE
button to toggle between
frequency and duty cycle mode.
On the top right corner of the display shows the waveform’s RMS value, for reference only. When the LCD
displays 1-10 period waveform cycle or the peak-peak difference value is greater than 1/3 div, the reading is
valid, otherwise the Meter displays “ ————“
I. Capacitance
Range Resolution
Accuracy
Overload
Protection
40nF 10pF
Under REL mode:
±(3%+10)
250V DC or AC rms
400nF 100pF
±(3%+8)
4
μ
F
1nF
40
μ
F 10nF
100
μ
F 100nF
±(4%+8)
In this direction will find a vision of the measurement technique:
http://www.industrial-needs.com/measuring-instruments.htm
NOTE:
"This instrument doesn’t have ATEX protection, so it should not be used in potentially explosive
atmospheres (powder, flammable gases)."
