Manual
24
-
Over:
In this mode, you need to set the upper temperature range. Press
˂ or ˃ to change the
temperature range in steps of 0.1 K. By pressing and holding
˂ or ˃, the value is changed in 1 K
steps. The infrared image superposes the camera image within the set temperature interval.
-
Under:
In this mode, you need to set the lower temperature range. Press
˂ or ˃ to change the
temperature range in steps of 0.1 K. By pressing and holding
˂ or ˃, the value is changed in 1 K
steps. The infrared image superposes the camera image within the set temperature interval.
4.16.1.8 Settings for hot superposition
Press hot key 2 in superposition mode. The interval area will start flashing yellow. Press Enter key to
open the pop-up-dialogue-box. Here, you can set the upper and lower limit of the interval as well as the
highest and lowest temperature.
