Manual
17
5.12.3.3.4 To set the colour palette and the display
You can choose between nine different colour palettes. To do so, click on
. The colour palettes will
be shown and the palette can be changed.
The slide controls in the software can be set individually to set the colour effect in the image as desired.
When you click on “Auto”, the default limits are restored.
Click on
to save the colour palette as you have set it.
5.12.3.3.5 Emissivity
You can choose a value from the analysis information which you have to double-click on. Then, a new
window will open in which the emissivity value of the measurement can be adjusted. This emissivity value
is adopted and saved after you have clicked on “confirm”.
If you would like to change the emissivity value of all analysis tools, you must double-click on the
emissivity value in the infrared settings and then change and save this value correspondingly.
