Manual
11
2) After setting the upper text to "bASI" or "Euro", pressing the "Enter Button" (4-4) will save the setting
function as default.
Auto power OFF
When the lower display shows "PoFF",
1) use the "
▲ Button" (4-5) or the "▼ Button" (4-6) to set the upper value to "yES" or "no".
yES - Auto Power Off enabled
no - Auto Power Off disabled
3) After selecting "yES" or "no", press the "Enter Button" (4-4) to save the default setting.
Switch beeper sound ON/OFF
1) Use the "▲ Button" (4-5) or the "▼ Button" (4-6) to select "yES" or "no".
yES - meter's beep sound will be ON by default
no - meter's beep sound will be OFF by default
3) After selecting "yES" or "no", press the "Enter Button" (4-4) to save the default setting.
Set the temperature unit to °C or °F
When the lower display shows "t-CF",
1) use the
"▲ Button" (4-5) or the "▼ Button" (4-6) to select "C" or "F".
C - Temperature unit is °C
F - Temperature unit is °F
2) After the display unit is selected ("C" or "F"), press the "Enter Button" (4-4) to save the default setting.
Set sampling time (seconds)
When the lower display shows "SP-t",
1) use the "▲ Button" (4-5) or the "▼ Button" (4-6) to adjust the value (0, 1, 2, 5, 10, 30,60, 120, 300,
600, 1800,3600 seconds).
Note:
If you set the sampling time to "0 second", it is ready for the manual datalogger function.
2) After the sampling value is selected, press the "Enter Button" (4-4) to save the default setting.
SD memory card format
When the lower display shows "Sd F",
1) use the "▲ Button" (4-5) or the "▼ Button" (4-6) to set the upper value to "yES" or "no".
yES - to format the SD memory card
no - not format the SD memory card
2) If you select "yES", press the "Enter Button" (4-4) once again. The display will show the text "yES Ent".
If you are sure that you wish to format the SD memory card, press the "Enter Button" once. The SD card
will be cleared which means that all data saved on it will be deleted.
9
Power supply from DC adaptor
The meter can also receive its power supply from the DC 9V power adaptor (optional). Insert the plug of
the power adaptor into the "DC 9V Power Adapter Input Socket" (4-13). The meter will permanently be
powered ON when you use the DC ADAPTER power supply (The power button function is disabled).
10 Battery replacement
1) When the left corner of the LCD display shows "
", it is necessary to replace the battery.
However, normally measurements can still be taken for several hours after the low battery indicator
appears before the instrument becomes inaccurate.
2) Loosen the "Battery Cover Screws" (4-15) and remove the "Battery Cover" (4-16) from the instrument
and remove the battery.
3) Replace it with 6 DC 1.5 V batteries (UM3, AA, Alkaline/heavy duty) and put the cover back on.
4) Make sure the battery cover is secured after changing the battery.
11 RS232 PC serial interface
The instrument has an RS232 PC serial interface via a 3.5 mm terminal (4-12).
The data output is a 16-digit stream which can be utilized for the user's specific application.
An RS232 lead with the following connection will be required to link the instrument with the PC.
