© PCE Instruments
15
To set the alarm limits, press the
key in the current measuring mode.
Display
Meaning
This setting refers to tensile force
This setting refers to compressive force
L. Limit
Lower Limit. Here you set the first limit value. This value cannot be higher than
the H. Limit value.
H. Limit
Higher Limit. Here you set the second limit value. This value cannot be smaller
than the L. Limit value.
Number
Here you set the desired limit.
Use the arrow keys to select the desired parameter. Now press the
key to make
changes to this value. You can now use the arrow keys to change the value as desired. Confirm
the entry with the
key. Press the
key to return to the measuring mode.
Note:
The second limit value must always be higher than the first set limit value. The set values are
shown above the display in measuring mode. Pressing the
key selects between the
display of the set alarm tension or the set alarm compression.
