© PCE Instruments
5
8
Installation
This stirrer is provided in a box. Open the box, then remove the packaging and gently place the
device on the firm & levelled surface. Take care while unpacking and removing all accessories.
The user manual should be kept with the device for easy access. Please keep all packaging in
safe storage for at least two years for warranty purpose.
8.1
Location and mounting
Place the stirrer on a flat and levelled surface & ensure that all the four legs of this stirrer stands
on the surface firmly. Avoid installing on a slippery surface or surface prone to vibration.
1.
Ideal ambient temperature is 25°C ± 1°C; avoid placing the unit in direct sunlight.
2.
Keep clearance of at least 20 cm from all side to increase the cooling efficiency.
3.
Keep the unit away from heated solution to avoid sample temperature issues.
4.
Do not place the equipment at a place where it becomes difficult to operate it.
8.2
Connecting power adaptor
1.
Connect one end of the power adaptor to the rear side of the stirrer and another end
to the power supply as shown in the figure below.
2.
Push the power adaptor firmly for proper connection and turn ON the main switch.
3.
Make sure that input power source is according to stirrer requirement.
Содержание PCE-MSR 150
Страница 9: ...PCE Instruments 7...
