Manual
4
4
Instructions
1. Place the device on a plain surface.
2. Fill the round-bottom flask and insert it into the heating mantle.
3. Enable power supply. The red lamp will light up.
4. Turn the rotary switch until you reach the desired temperature. The green lamp will light up.
5. The brightness of the lamp depends on the temperature you set.
5
Additional advice
1. The surface of the heating mantle is oiled. Therefore, please do not insert the round-bottom flask
immediately when first using the device. Heat up the device first and switch it off as soon as it emits
white smoke. Switch it back on as soon as the smoke disappears. Now you can operate the device
normally.
2. Please make sure to fill the round-bottom flask before inserting it into the heating mantle.
6
Troubleshooting
Error
Reason
Solution
No power
Poor connection between plug
and socket
Check plug and socket
Does not heat up
Heating mantle is damaged
Replace heating mantle
No temperature control
Temperature controller is broken
Replace temperature controller
7
Disposal
For the disposal of batteries, the 2006/66/EC directive of the European Parliament applies. Due to the
contained pollutants, batteries must not be disposed of as household waste. They must be given to
collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use them or
give them to a recycling company which disposes of the devices in line with law.
8
Contact
If you have any questions about our range of products or measuring instruments please contact PCE
Instruments.
8.1
PCE Instruments UK
By post:
PCE Instruments UK Ltd.
Units 12/13 Southpoint Business Park
Ensign Way, Southampton
Hampshire
United Kingdom, SO31 4RF
By phone:
02380 987 035
8.2
PCE Americas
By post:
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
33458 FL
USA
By phone:
561 320 9162
