Manual
10
7.4.3 Tolerance
Under this menu, the tolerance limit can be set. When the measuring data
is exceed the setting value, the icon of “!” will be showed on the LCD and it
will flash. If the alarm function is turn on, the durometer will make the alarm
sound.
7.4.4 Grubbs error
Under this menu, the Grubbs error handling
can be set to on or off. (Grubbs error handling
is available only under the average mode and
maximum average mode). If the Grubbs error
handling function is turn on, the Grubbs error
analysis will be applied to the current group
when a statistic group is formed (the measure
times meet the setting time) and the gross
error data will be taken as invalided data to be abandoned during the calculating of average value and
Range. If the auto-
print function is turn on, a symbol of “!” will be marked after the gross error data.
7.4.5 Workpiece
When several samples is need to be measured, the samples can be coded. The coded ra
nge is 00 … 99.
When the date saved, the sample code saved too. The samples number corresponding to the data can
be printed. It also can be looked up during browsing.
7.4.6 Dwell Time
When Dwell Time is set not “0”, the hardness value is captured for a period
of time. This way is specialized by some standards. Now a countdown clock
is displayed on LCD.
7.5 System Setup
Under System Setup, the date/time, backlight time, on or off of key
sound, on or off of alarm sound can be set.
7.5.1 Date/Time
Under this menu, year, month, day, hour, minute, second can be set.
