© PCE Instruments
10
6
Function setting
6.1
Freeze measured value
•
Press the HOLD kry to freeze the current readings on the display. HOLD" appears in
the display.
•
Press again to return to measuring mode.
6.2
MIN / MAX
•
Press the MAX / MIN key to activate the max/min memory. The display shows the
current and the maximum measured value.
•
Press the MAX / MIN key again. The display shows the current and the minimum
measured value.
•
Press the MAX / MIN key again. The display shows "Max / Min" and the current
measured value (only available for the measuring functions temperature and
frequency). The min and max values are saved in the background.
•
Press and hold the MAX / MIN key to exit the function.
6.3
Hold peak value
With the hold peak function, you can display the max. and min. value of the sine wave in the V
AC measuring function.
•
Press and hold the RANGE key to switch the function on or off.
6.4
Set measurement range
You can influence the measurement ranges for the measuring functions voltage, resistance,
capacitance, frequency and µA. The default setting is automatic measurement range change.
•
Press the RANGE key repeatedly until the appropriate measurement range is set.
•
Press and hold the RANGE key to return to automatic range selection.
6.5
Display backlight
Press and hold the HOLD key to turn the backlight on or off.
(Depending on the firmware version, the display backlight switches off automatically after 30
seconds.)
6.6
Measuring spot illumination
Press and hold the ZERO key to switch the measuring spot illumination on or off.
6.7
Bluetooth connection
Press and hold the MODE key to switch the Bluetooth connection on or off.
For use on the PC, download the PCE-DC 50 software from our download area:
https://www.pce-instruments.com/english/download-win_4.htm
Use the dongle from the delivery scope as the Bluetooth interface.
The "Meterbox Pro" app is available in app stores for connection to mobile devices.
